• August

    17

    2015
  • 546
  • 0
Mindful Considerations for Masonry Chimney Construction

Mindful Considerations for Masonry Chimney Construction

Do you have a chimney at home? If not, you might want to opt for the construction of a masonry chimney. While constructing a chimney, you should be extremely careful: you do not want to burn down your house.

Importance of a Masonry Chimney

A Masonry Chimney is a very integral part of your household, since it is exposed to outside air. You should not overlook or ignore the blueprint of a chimney, otherwise water will get accumulated inside it, leading to a colossal waste of money. If you want to operate a wood stove, it is not possible without a fully functioned Masonry Chimney.

There are a few distinct characteristics of a good chimney:

  • Chimney construction for wood stoves follows the exact instructions of the manufacturer or a contractor
  • It includes a fully operational appliance, with the correct size and type
  • It has a central and strategic location in the house
  • The fire lights up easily
  • It does not make the room hazy when lighted
  • It does not give out a bad odor

Only if you pay proper attention while constructing a Masonry Chimney, will you be able to accelerate the performance of your wood stove. Chimney construction for wood stoves is more likely to be effective if the Masonry Chimney is constructed the right way. The characteristics of a good wood stove are:

  • While adding more wood into the stove, smoke does not leak from it
  • A good wood stove ensures maximum circulation of air, even when there is no fire burning
  • As soon as you light a fire, the smoke enters the Masonry Chimney, rather than circulating in the room
  • A properly lit fire burns red instantly

Common Problems

There are quite a few problems that can occur when it comes to operating a Masonry Chimney or a wood stove.

  1. Poor Performance

At times, no matter how hard you try, lighting a fire in a wood stove becomes exceedingly difficult. This usually happens if the chimney gets too old and gathers moisture. The solution to this problem is to make sure your chimney is properly insulated.

  1. Leave the Spillage Door Open

Whenever the little spillage door opens to refill wood, smoke comes out of it. A plausible explanation for this might be the lack of air flowing in the door of the stove, which limits the flow of the smoke.

  1. Cold Hearths

Cold hearths occur when cold air permeates the stove, even when a fire isn’t burning. This happens when the outside temperature affects the air inside the chimney, making the chimney cold and resulting in a stale odor. Another reason for cold hearths is the inappropriate location of the Masonry Chimney. The only way to avoid cold hearths is to make sure that the positioning of the chimney is at a higher point, where it cannot come in contact with the cold air outside.

LEAVE A COMMENT

You comment will be published within 24 hours.

Cancel reply
© Copyright 2016 Almand Bros | All Rights Reserved | Website Development by Copyright 2016 Kronos Technologies